Replacement Parts; Replacement Part Sets - Burkert 2300 Instructions De Service

13. replacemenT parTs
Warning!
risk of injury when opening the actuator housing!
The actuator contains a tensioned spring. If the housing is opened,
there is a risk of injury from the spring jumping out!
• The actuator housing must not be opened.
Caution!
risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable replacement parts may
cause injuries and damage the device and the surrounding area.
• Use only original accessories and original replacement parts from
Bürkert GmbH & Co. KG.
13.1. replacement part sets
The following replacement part sets are available for the angle seat
control valve Type 2300:
• Control
cone set consisting of control cone, dowel pin, graphite seal and
lubricant.
32
english
Type 2300

Replacement parts

Order number for control cone set
dn ptfe steel
13/15 170315
20 170316
25 170318
32 170319
40 170320
50 170321
1 Graphite seal
2 Control cone
3 Dowel pin
1
2
3
Fig. 14: Replacement parts
steel steel
170322
170323
170324
170325
170326
170327