Intended Use; Basic Safety Information - Burkert S030 Manuel Utilisateur

Caution
Warns you against a possible risk.
• Failure to observe this warning can result in substantial
or minor injuries.
note
Warns you against material damage.
• Failure to observe this warning may result in damage
to the fitting or the system.
indicates additional information, advice or important
recommendations for your safety and for the perfect
operation of the device inserted into the fitting.
→
indicates a procedure to be carried out.
english
4
• Do not use this fitting to measure gas flow rates.
• Do not use fluid that is incompatible with the materials from
which the fitting is made.
• Do not use this fitting in an environment incompatible with
the materials from which it is made.
• Do not subject the fitting to mechanical loads (by placing
objects on top of it or by using it as a step, for example).
• Do not make any external modifications to the device. Do
not paint any part of the fitting.
3.

bASic SAFeTy inFoRmATion

This safety information does not take into account:
• any contingencies or occurences that may arise during
installation, use and maintenance of the devices.
• the local safety regulations that the operator must ensure the
staff in charge of installation and maintenance observe.
danger due to high pressure in the installation.
danger due to high temperatures of the fluid.
danger due to the nature of the fluid.
english
6
2.

inTended uSe

use of inline fittings that does not comply with the
instructions could present risks to people, nearby
installations and the environment.
• The S030 fitting is intended to measure the flow rate
of clean fluids in the piping thanks to its paddle wheel.
The S030 fitting may be combined to an electronic
module for displaying, monitoring or controlling
the flow rate, or a transmitter fitted with a bajonett
connection.
• Use this fitting in compliance with the specifications
and conditions of commissioning and use given in the
contractual documents, in this user manual and in the
user manual of the electronic device which is fitted into
it.
• Safe and trouble-free operation of the fitting depends
on its proper transport, storage and installation, as well
as careful operation and maintenance.
• Only use this fitting as intended.
Restraints
Observe any existing restraints when the fitting is exported.
Foreseeable misuse
• Do not use the fittings in PVC or PP in explosive
atmospheres.
Various dangerous situations
To avoid injury take care to:
• prevent any power supply switch-on.
• ensure that installation and maintenance work are car-
ried out by qualified, authorised personnel in posses-
sion of the appropriate tools.
• guarantee a set or controlled restarting of the process,
after a power supply interruption.
• use the fitting only if in perfect working order and in
compliance with the instructions provided in the user
manual.
• observe the general technical rules when installing and
using the fitting.
note
chemical compatibility of materials in contact with
the fluid.
• Systematically check the chemical compatibility of the
component materials of the fitting and the products
likely to come into contact with it (for example: alco-
hols, strong or concentrated acids, aldehydes, alkaline
compounds, esters, aliphatic compounds, ketones,
halogenated aromatics or hydrocarbons, oxidants and
chlorinated agents).
english
5 5
english
7 7