Technical Features; Designated Application Area - Burkert 2300 Instructions De Service

5.2.1. Technical features
• Theoretical setting ratio (KVS/KV0) 50:1; alternatively, other
setting ratios can be realised.
• KVR value, i.e. the smallest KV value at which the angularity
tolerance according to DIN IEC 534-2-4 is still maintained:
≤ DN20
KVR at 10% of the stroke
> DN20
KVR at 5% of the stroke
5.2.2. Options
• Activation unit
Depending on the requirement, activation units in various designs
are available.
• Position controller Type 8692 and 8696
• Process controller Type 8693
5.2.3. device versions
actuator sizes
Depending on the nominal width, the angle seat control valve is
available for the following actuator sizes:
nominal width dn available actuator size ø [mm]
13/15 50
20 50
25 50
32 -
40
-
50
10
70
70
-
70
70
90
90
english
Type 2300
Product description
Control pressure
Designs with lower control pressure (reduced spring force) are
available on request.
Contact your Bürkert sales office or our Sales Centre, e-mail:
info@de.buerkert.com
5.3. designated application area
Observe the maximum pressure range according to the
rating plate!
• Neutral gases and liquids up to 16 bar.
• Steam up to 10 bar / 180 °C.
• Aggressive media
5.3.1. application areas
e.g. Plant construction
Food processing
Chemical engineering
Steriliser construction, temperature control
Gas dosing
Conveyor systems for various bulk material (also sensitive
foodstuff)