General Hazardous Situations.
To prevent injuries:
• Ensure that the system cannot be activated unintentionally.
• Installation and maintenance work may only be carried
out by authorized technicians with the appropriate tools.
• After an interruption in the power supply, ensure that the
process is restarted in a defined or controlled manner.
• The device may be installed and operated only when in
a perfect condition and in consideration of the operat-
ing instructions.
• The general rules of technology must be observed for
application planning and operation of the device.
Failure to observe this operating manual and its
operating instructions as well as unauthorized tam-
pering with the device release us from any liability
and also invalidate the warranty covering the device
and accessories!
english
8
6.
Technical daTa
The following values are indicated on the type label:
• Max. medium temperature, current type,
pressure, voltage (tolerance ± 10 %),
protection class
Materials
Housing:
Brass
Seat seal:
FKM (F)
Housing seal:
FKM (F)
Coil jacket:
Epoxy or Polyamide
Media
Heating oils DIN 51603 Part 1 or diesel fuel acc. to
DIN EN 590 with viscosity 1.6 – 21 cST (other media
requires a prior agreement with the Bürkert sales office)
Ambient temperature
0 °C ... +60 °C
Operating principle 2/2-way valve
A (NC)
Protection class:
IP65 in accordance with EN 60529
with authorized device socket in
accordance with DIN 175301-803
english
10
All manuals and user guides at all-guides.com
A
P
5.
general infOrmaTiOn
5.1. contact address
germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
international
Contact addresses can be found on the final pages of the
printed operating instructions.
And also on the internet at:
www.burkert.com
5.2. Warranty
The warranty is only valid if the device is used as intended in
accordance with the specified application conditions.
5.3. information on the internet
The operating instructions and data sheets for Type 6213 can
be found on the Internet at:
www.burkert.com
6.1. Type label
6.1.1.
standard type label
Housing material
Seal material
Orifice
Operating principle
Type
Id.- Number
DIN certification mark
Register number
Voltage, Frequency, Output
Connecting thread, Nominal pressure
Fig. 1:
Example of the type label
Type 6213
english
9
XXXX
english
11