Conformance With Eac; Conformance With Rohs; Conformance With Reach - Kollmorgen AKM 2G Manuel D'installation

AKM2G Instructions | 10 Approvals
10.1 Conformance with uL
Recognized for USA and Canada in File E61960.
10.2 Conformance with CE
The motors have been tested by an authorized testing laboratory in a defined configuration. Any
divergence from the configuration and installation described in this documentation means that the user
will be responsible for carrying out new measurements to ensure conformance with regulatory
requirements.
Kollmorgen declares the conformity of the product series AKM2G with the following directives:
EC Directive 2014/35/EU, Low voltage
l
EC Directive 2014/30/EU, Electromagnetic compatibility
l

10.3 Conformance with EAC

EAC is the abbreviation for EurAsian Conformity. The mark is used in the states of the Eurasian Customs
Union (Russia, Belarus, Kazakhstan) similar to the European CE mark.
Kollmorgen declares, that the AKM2G has passed all required conformity procedures in a member state
of the Eurasian Customs Union, and that the AKM2G meets all technical requirements requested in the
member states of the Eurasian Customs Union :
Low voltage (TP TC 020/2011)
l
Electromagnetic Compatibility (TP TC 004/2011)
l
Contact in Russia:
Intelligence Automatics LLC. , Bakuninskaya Str. d 14, Building 1, RU-105005 Moskau

10.4 Conformance with RoHS

Directive 2011/65/EC of the European Union on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS) became operative as from the 3rd of January,
2013. Following substances namely are involved
Lead (Pb), Cadmium (Cd), Hexavalent chromium (CrVI), Polybrominated biphenyls (PBB),
Polybrominated diphenyl ethers (PBDE), Mercury (Hg)
The AKM2G motor series is manufactured RoHS conformal.

10.5 Conformance with REACH

EU Regulation no. 1907/2006 deals with the registration, evaluation, authorisation and restriction of
chemical substances 1 (abbreviated to "REACH").
AKM2G motors do not contain any substances (CMR substances, PBTsubstances, vPvB substances and
similar hazardous substances stipulated in individual cases based on scientific criteria) above 0.1 mass
percent per product that are included on the candidate list.
362 Kollmorgen | kdn.kollmorgen.com | August 2020
Feedback systems and contacts must not be tested with high voltage. Feedback
systems are not suitable for high voltage testing, it is allowed to exclude sensitive
electronic components from these tests. Feedback systems might be destroyed
during a high voltage test.
CE Declaration of Conformity can be found on the Kollmorgen website.