Kollmorgen AKM 2G Manuel D'installation page 180

AKM2G Instructions | 7 Technical Data
7.2.2.1 AKM2G-21L Derates for Different Options
Note: Derate information is for general estimation only. For the most accurate information for your motor use the online
Performance Curve Generator located at
download at www.kollmorgen.com/sites/default/files/public_downloads/AKM2G%20Performance%20Curves_0.pdf
refer to Kollmorgen's Motioneering Software Tool at
support/technical/motioneering-online/.
De-rates are referenced to the Max Continuous Torque ΔT wdg. = 100°C
Options - No
Brake
SFD
SFD/Seal
DSL
DSL/seal
EnDat2.2
EnDat2.2/Seal
180 Kollmorgen | kdn.kollmorgen.com | August 2020
pcgh.kollmorgen.com
www.kollmorgen.com/en-us/service-and-
0 1000 2000
100.0% 100.0% 98.4% 96.3% 94.2% 92.1% 89.9% 87.7% 85.5% 83.2%
96.8% 96.9% 95.2% 93.0% 90.8% 88.6% 86.3% 84.0% 81.7% 79.4%
100.0% 100.0% 98.4% 96.3% 94.2% 92.1% 89.9% 87.7% 85.5% 83.2%
96.8% 96.9% 95.2% 93.0% 90.8% 88.6% 86.3% 84.0% 81.5% 78.6%
97.7% 97.8% 96.0% 93.8% 91.6% 89.4% 87.2% 84.9% 82.7% 80.4%
94.4% 94.5% 92.1% 89.2% 86.2% 83.1% 80.1% 77.0% 73.9% 70.7%
, the AKM2G Performance Curves document available for
Speed: RPM
3000 4000 5000 6000
, or
7000 8000