Conformance With Ce; Conformance With Eac - Kollmorgen SERVOSTAR 300 Manuel D'instructions

6.4.2 Conformance with CE

CE Declarations of Conformity can be found on the Kollmorgen website.
The servo amplifiers have been tested by an authorized testing laboratory in a defined con-
figuration, using the system components that are described in this documentation. Any diver-
gence from the configuration and installation described in this documentation means that you
will be responsible for carrying out new measurements to ensure conformance with reg-
ulatory requirements.
Kollmorgen declares the conformity of the products SERVOSTAR 300 (S300) with the fol-
lowing directives
EC Machinery Directive (2006/42)
EC EMC Directive (2004/108/EC)
EC Low Voltage Directive (2006/95/EC)
Concerning noise immunity the servo amplifier meets the requirements to the 2nd envir-
onmental category (industrial environment). For noise emission the amplifier meets the
requirement to a product of the category C2 (motor cable up to 10 m). With a motor cable
length from 10 m onwards, the servo amplifier meets the requirement to the category C3.
This product can cause high-frequency interferences in non industrial environments which
can require measures for interference suppression.
Functional Safety Conformance (STO) according to EC Machinery Directive
The S300 servo amplifier offers a single channel STO function (Safe Torque Off) that can be
used as a functional safe restart lock.
The safetys concept is certified. The safety circuit concept for realizing the safety function
"Safe Torque Off" in the servo amplifiers S300 is suited for SIL CL 2 according to IEC 62061
and PLd according to ISO 13849-1.
The subsystems (servo amplifiers) are totally described for safety technics with the char-
acteristic data SIL CL, PFHD and TM.
Device
STO-Enable

6.4.3 Conformance with EAC

EAC is the abbreviation for EurAsian Conformity. The mark is used in the states of the Eur-
asian Customs Union (Russia, Belarus, Kazakhstan) similar to the European CE mark.
Kollmorgen declares, that the SERVOSTAR 300 has passed all required conformity pro-
cedures in a member state of the Eurasian Customs Union, and that the SERVOSTAR 300
meets all technical requirements requested in the member states of the Eurasian Customs
Union :
Low voltage (TP TC 020/2011)
Electromagnetic Compatibility (TP TC 004/2011)
Contact in Russia:
Intelligence Automatics LLC. , Bakuninskaya Str. d 14, Building 1, RU-105005 Moskau
EAC certificates can be found on the Kollmorgen website.
Operation mode EN 13849-1
single channel PLd
S300 Safety Guide | 6 Appendix
EN 62061 PFHD [1/h]
SIL CL 2 0
Kollmorgen | June 2015
TM [Year]
20
171