Kollmorgen AKM 2G Manuel D'installation page 189

7.2.4.1 AKM2G-22L Derates for Different Options
Note: Derate information is for general estimation only. For the most accurate information for your motor use the online
Performance Curve Generator located at
download at www.kollmorgen.com/sites/default/files/public_downloads/AKM2G%20Performance%20Curves_0.pdf
refer to Kollmorgen's Motioneering Software Tool at
support/technical/motioneering-online/.
De-rates are referenced to the Max Continuous Torque ΔT wdg. = 100°C
Options - No Brake
SFD
SFD/Seal
DSL
DSL/seal
EnDat2.2
EnDat2.2/Seal
pcgh.kollmorgen.com
www.kollmorgen.com/en-us/service-and-
0 1000 2000
100.0% 99.1% 97.3% 95.3% 93.3% 91.2% 89.0% 86.8% 84.5%
98.2% 97.3% 95.4% 93.4% 91.3% 89.2% 87.0% 84.6% 81.3%
100.0% 99.1% 97.3% 95.3% 93.3% 91.2% 89.0% 86.8% 84.5%
98.2% 97.3% 95.4% 93.4% 91.3% 89.2% 86.6% 83.4% 80.0%
97.1% 95.9% 93.5% 91.0% 88.4% 85.6% 82.7% 79.7% 76.5%
95.3% 93.7% 91.0% 88.1% 85.0% 81.8% 78.4% 74.8% 71.0%
AKM2G Instructions | 7 Technical Data
, the AKM2G Performance Curves document available for
Speed: RPM
3000 4000 5000
Kollmorgen | kdn.kollmorgen.com | August 2020
, or
6000 7000 8000
189