Publicité
/8%5,&$177$%/(
Gearbox oil (recommended):
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or
superior to the A.P .I. GL-4 specifications.
Mixer oil (recommended):
Use high-quality oils with characteristics in compliance with or superior to the ISO-L-ETC++, A.P .I. TC++ specifications.
Fork oil (recommended):
comparison with the two recommended products, these can be mixed as indicated below:
SAE 10W
IP F.A. 5W 67% of the volume, + IP F.A. 20W 33% of the volume.
SAE 15W
IP F.A. 5W 33% of the volume, + IP F.A. 20W 67% of the volume.
Bearings and other lubrication points (recommended):
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range
-30°C.... +140°C, dripping point 150°C... 230°C, high protection against corrosion, good resistant to water and oxidation.
Protection of the battery poles:
Spray grease for chains (recommended):
Brake fluid (recommended):
Use new brake fluid only.
Engine coolant (recommended):
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35° C at least.
IP F.C., SAE 75W - 90.
IP GREEN HIT
IP F.A. 5W or IP F.A. 20W fork oil. If you need an oil with intermediate characteristics in
neutral grease or vaseline.
IP CHAIN SPRAY.
IP F.F., DOT 5 (DOT 4 compatible).
IP ECOBLU -40°C.
IP AUTOGREASE MP .
71
Publicité
