Maintenance - Cleaning - Lubrication; Engine; Greasing; Oil Filling - GOLDONI Star Série Manuel D'emploi Et Entretien

requisite certification authority to modify the tractor's logbook as necessary.

6. MAINTENANCE - CLEANING - LUBRICATION

6.1 ENGINE

Refer to the engine instruction manual.

6.2 GREASING

Every 50 hours, grease the points highlighted in fig.16:
1 Front axle swivel pins (2 grease nipples).
2 Brake pedal pins (2 grease nipples)
3 3-point hitch lift arms (2 grease nipples).
4 Left lift link (2 grease nipples).
5 Right lift link.
It is advisable to use AGIP GREASE LP2

6.3 OIL FILLING

6.3.1 Gear casing and lift

Check level every 50 hours through plug with dipstick n.21 fig.1.
It is advisable to use AGIP SUPER TRACTOR UNIVERSAL SAE 15W/40 oil.
Change oil every 800 hours. Amount needed: about 32Kg.
Oil drain: plugs n.1 fig.17-18-19 (right and left).
Oil filling: through plug n.21 fig.1.
First oil change after the first 50-60 work hours.

6.3.2 Front transmission oil

It is advisable to use AGIP SUPER TRACTOR UNIVERSAL SAE 15W/40 oil.
Change oil every 800 hours. Amount required: about 4.5Kg.
Oil drain: plug n.2 fig.20 and cover n.2 fig.21 (right and left wheel)
Oil filling: plug n.1 fig.20 and plug n.1 fig.21 (right and left).
First oil change after the first 50-60 hours.

6.3.3 Cleaning Transmission and Lift oil filter

6.3.3.1 In-take oil filter
see n.1 fig.22
The filter should be cleaned every 400 hours, every oil change, and whenever
the filter clogged warning light n.8 fig.3 (n.10 fig.30) comes on. Drain the oil,
remove the filter (n.1 fig.22), wash it with petrol or diesel, dry it and replace it in
its seating.
6.3.3.2 Delivery line oil filter
see fig.15
75