With Vm Engine - GOLDONI Star Série Manuel D'emploi Et Entretien

WIRE COLOURS
A Orange
B White
C Pink
D Grey
E Green

6.9.3 With VM engine

- Fuses
Before changing a fuse, eliminate the fault that caused it to blow. The fuses
protect the following circuits (fig.28):
A= Optional (10A).
B= Power supply for parking brake switch (brake lights), turning indicators and
hazard light switch, cab connector (15A).
C= Rh front / lh rear side lights, 8-way male connector pre-engineered in cab, 7-
pin power socket (10A).
D= Lh front / rh rear side lights, registration plate light, 8-way male connector
pre-engineered in cab, control panel lighting, 7-pin power socket connector,
cab connector (10A).
E= Alternator energizing, power supply for motor stop solenoid valve, PTO
switch, control panel, 4WD switch, electro-stop (7.5).
F= Power supply for 8-way male connector pre-engineered in cab (7.5A)
G= Lh lower beam (7.5A).
H= Rh lower beam (7.5A).
I = Auxiliary power socket (20A).
L= Power supply for 7-pin power socket, horn (10A).
M= Power supply for main beam blinker function, hazard light switch, 8-way male
connector pre-engineered in cab, cab connector (15A).
N= Rh and lh main beam, main beam indicator light (15A).
The tractor has a main 60A knife-blade fuse situated in the internal part of the
fixed bonnet. This fuse protects the entire electrical system.
Key to wiring diagram
(see last page)
F Blue
G Yellow
H Light-blue
M Brown
N Black
R Red
V Purple
81