Cab And Roll Bar; Maintenance - Cleaning - Lubrication; Engine; Greasing - GOLDONI 3000STAR Serie Emploi Et Entretien

Regulating lift speed and response sensitivity
Screw register n.1 fig.16, on the hydraulic slice all the way in and the implement is
locked in its raised position. This is a safety device when driving on-road with an
implement mounted.
When this register is screwed all the way out, the lift descends faster.
Turn the register n.2 fig.16 clockwise for increased 3-point hitch sensitivity.
3-point hitch sensitivity can be further increased but attaching it to one of the lower
links on the tractor hitch.
The 3-point hitch CANNOT be used to tow implements.

5. CAB AND ROLL BAR

(Optional)
- For Italy
If the cab and roll bar are installed after the purchase of the tractor, the customer
should ask our Sales Division for the corresponding Approval documents.
With these documents and the registration book and/or Log Book, the customer
should go to his local Ministry of Transport Licencing Office. This office will update or
replace the registration book/Log Book.
- For other countries
If the cab or roll bar are installed after the purchase of the tractor, the owner should
refer to the national approval agencies to have the tractor's registration or log book
brought up to date.

6. MAINTENANCE - CLEANING - LUBRICATION

6.1 ENGINE

See engine operation manual.

6.2 GREASING

Every 50 hours grease the points shown in fig.17:
1 Front axle pivot pins (2 grease nipples)
2 Brake pedal pin.
3 3-point linkage top link (2 grease nipples).
4 Left lift rod (2 grease nipples).
5 Right lift rod.
It is advisable to use AGIP GREASE LP2.
65