For 24 Speed Models With Super Underdrive; For Models With Dual Power And Reverser - GOLDONI Star Série Manuel D'emploi Et Entretien

4.4.1 For 24 speed models with Super Underdrive

Select the speed range with the range lever n.3 fig.1. Positions (vedi fig.7):
N = Neutral
L = Creep
V = Fast
R = Reverse
Then select the gear using lever n.4 fig.1 in the combinations shown in fig.8.
Another 12 speeds can be had using the super underdrive lever n.5 fig.1, as
shown in fig.9:
N = Neutral
1 = Creep
2 = Normal

4.4.2 For models with Dual Power and reverser

Use lever n.5 fig.1 as follows (see fig.10):
1st) select 16+8 (Dual Power) or 8+8 speeds (reverser).
In 16+8 speed mode the lever (n.3 fig.1 and see fig.11) can be used to give:
N = Neutral
L = Creep
V = Fast
R = Reverse
With the Dual Power control lever (n.4 fig.2), the following speed ranges can
be selected (fig.12):
N = Neutral
V = Fast
R = Dual power reduction
In 8+8 speed mode lever (n.3 fig.1 and see fig.7) can be used for:
N = Neutral
L = Creep
V = Fast
R = Range with inhibitor: cannot be selected.
Lever n.4 fig.2 can be used for the following speeds (fig.12):
N = Neutral
V = Forward
R = Reverse
Reverse gear engagement or subsequent forward gear
engaging must always be done with the engine at minimum
Rpm and the wheels stopped.
2nd) Select the speed required using lever n.4 fig.1, as shown in fig.8.
71