Partie Régulation; Carte De Régulation Rv33; Front Side; Back Side - gefran SieiDrive AVy 1007 Mise En Service Rapide

5.3. PARTIE RÉGULATION
5.3.1 Carte de régulation RV33
Figure 5.3.1.1 : Commutateurs et cavaliers sur la carte de régulation RV33-4

FRONT SIDE

Designation Color
red LED lit during the Hardware Reset
RST
PWR green LED lit when the voltage +5V is present and at correct level
RS485 green LED is lit when RS485 interface is supplied
green LED lit during IGBT modulation
PWM
green LED is flashing when regulation is running (not in STARTUP menu)
RUN
+5VE green LED lit when encoder power supply +5V (XE-9)
+8VE red LED lit when encoder power supply +8V (XE-2)
(test point) Phase current signal (U) (see manual "AVy Function description and parameters", table 1.3.1.2.2)
XY4
(test point) Reference point
XY5
Table 5.3.1.1 : LED et Points test sur la carte de régulation
Function
—————— Procédure de câblage ——————

BACK SIDE

ai4050
65 Ch.5