Maintenance In Non-Use Time - Mash Side 400 Mode D'emploi

Attention: If you use high-press water to wash the motorcycle,
please do not point the squirt gun at the electrical parts, plug,
cables, bearings and ECU, etc. The high press would let the water
get into the parts and lead to the failure of function and premature
aging.
-Please use ordinary detergent brands to clean your motorcycle, for
the dirtiest places, please use brush to clean.
-Plug up the muffler before cleaning with water to prevent water
getting into the inside muffler.
-After cleaning with water, please mop up the motorcycle with
clothing or just dry off. Ride for a distance until the engine has
reached a working temperature; meanwhile apply brake to
evaporate the water left inside the parts.
- Since the motorcycle cools down, please grease all the sliding
parts and bearings with lubricating oil and butter, meanwhile grease
the oil plug with lubricating oil.
- In order to avoid any sundries getting into the electronic system,
please protect your electronic system.
When washing the motorcycle, please remove the air cleaner cover
and filter core and using foam or cotton yarn to protect the intake
channel.
When washing, please block up the muffler to avoid the water
getting into the muffler and engine.

18. Maintenance in Non-use Time

For the motorcycle to be stored for a long period of time, attention
should be paid to the prevention of moisture, sunshine and rain
attack in order to protect it from unnecessary damage. Special
check-ups should be carried out on those important parts and
subassemblies before storage.
①Change lubricating oil.
②Grease the chain.
③Dismantle the battery and put it in a shady, cool and
well-ventilated place. It is suggested that the battery be charged
once a month to preventing it from over discharged and out of
function.
④Clean the vehicle and apply antirust oil to the part vulnerable to
rust.
⑤Inflate the tyre as required and support the vehicle up with the
main stand.
⑥Take out the ignition key and keep it in your well planned place
for easy resumption of service.
⑦Put the covering over the motorcycle.
44