Combined rear position lamp
Loosen the screws, remove the taillight lampshade
Lightly rotate taillight seat, take out the seat and bulb.
Lightly press bulb, rotate in counter-clockwise.
Install new bulb in opposite order as below.
Taillight bulb:12V21/5W
Turn signal light
Loosen the screws, remove the lamp lampshade
Lightly press bulb, rotate in counter-clockwise.
Install new bulb in opposite order as below.
Turn lamp bulb specifications:12V10W
16. Bolts, nuts and fasteners
All the bolts, nuts and fasteners shall be screwed up as per the
maintenance period table. And check all the cotter pins, safety
gripping gears, locks, etc.
17. Vehicle washing
Cleaning the motorcycle
To keep a good looking of the covers, please wash your motorcycle
often.
The best way to clean your motorcycle is to use warm water
combining with detergent to mop up the dirt before using water to
clean up.
43