Gasoline And Exhaust Fumes; Modifications - Mash Side 400 Mode D'emploi

motorcycle is stopped.
• Keep legs away from hot and moving parts.
• Stay directly behind you, leaning as you lean.
• Avoid any unnecessary motion.
To drive with a passenger safely, you must:
• Go slower.
• Start slowing earlier as you approach a stop.
• Maintain a larger cushion of space ahead and to the sides.
• Wait for larger gaps when you want to cross, enter or merge into
traffic.

Gasoline and exhaust fumes

Gasoline is highly flammable and exhaust fumes are
poisonous:
• Turn off engine before refueling.
• Do not spill any gasoline on the engine, exhaust system or
the plastic parts.
• Do not refuel while smoking or near any open flame.
• Do not operate your motorcycle in a closed area as the
exhaust fumes may cause loss of consciousness or death within a
short time.
• Do not park the motorcycle near a flame source.
• If you swallow gasoline, inhale gasoline vapor or spill
gasoline in your eyes, see a doctor immediately or go to the nearest
hospital.
• If you spill gasoline on your clothes, change and wash the
affected area immediately with soap.
Caution
To avoid scalding by muffler, do not park the vehicle at
the walkway.
Passenger should attention that avoid scalded by the
muffler
Hay or rattan plant will arouse fire if too closed to the
muffler.

Modifications

Any modifications to this motorcycle, removal of original
equipment or use of unapproved accessories, may cause it to be
unsafe for use and may trigger severe accidents. Some
modifications may also make your motorcycle illegal to use on
public roadways, and will void all warranty coverage.
Your dealer is familiar with all recommended accessories for
your motorcycle, and should be consulted before installing any
accessories. The owner of the motorcycle is responsible for the
safety, installation and usage of any accessories not approved by
us.
Before installing new accessories, make sure they do not
interfere with moving parts, reduce ground clearance, and do not
interfere with the operating controls.
7