Mash Side 400 Mode D'emploi page 29

Maintenance shall be carried out to the motorcycle in a specified period. The meanings of various symbols in the list are as follows:
I:
Carry out inspection, cleaning, adjustment, lubrication or replacement.
C:
Cleaning. R: Replacement.
A:
Adjustment.
L:
Lubrication.
Caution
It is mandatory to replace parts and lubricants according to the maintenance table.
Periodic maintenance is a combination of verification and service operations performed through Approved Service Center network, to
properly maintain your motorcycle. It is normal during these operations that some parts may be replaced; components are inspected for
adjustment variations from their original settings as a result of normal wear and tear of the parts and usage of the motorcycle. These
interventions do not constitute flaws in the motorcycle; on the contrary, their purpose is to prevent any problems for your motorcycle to
continue operating properly.
This section introduces the inspection and adjustment of various parts of the motorcycle. It also introduces the technical requirements for
the inspection and adjustment.
Unless expressly stated or indicated in the maintenance period table, check and adjust all parts of the XY400 motorcycle
according to the contents hereof before using it.
26