Or Cable Description - Boston Scientific SC-4108 Manuel

OR Cable Description

CAUTION: Do not immerse the OR Cable or OR Cable Extension in water or other
liquids. The OR Cable and OR Cable Extension are intended for one-time only use; do not
resterilize.
The OR Cable is designed for two purposes:
• Connect the Lead to the External Trial Stimulator (ETS), see "ETS Description" on page
4, to facilitate intraoperative stimulation testing from outside of the sterile field.
• Connect the Lead to the ETS during the trial phase.
The 2x8 OR Cable connects to (2) 8-contact Leads. (When referring to the use of the OR
Cable, a Lead refers to the proximal end of a Lead, splitter, or Lead extension.) The 2x8 OR
Cable is compatible with any Boston Scientific Lead with an 8-contact proximal end.
Figure 1: 2x8 OR Cable
The 1x16 OR Cable connects to a 1x16 contact Lead.
Figure 2: 1x16 OR Cable
The OR Cable Extension may be used when desired to connect the OR Cable to the ETS.
Figure 3: OR Cable Extension
OR Cable Description
Clinician Trial Manual
92395602-02 1 of 233