Batch] - [Initial Preparation] - Ecolab EcoAdd Manuel D'utilisation

Control / Software

7.10.12.2 [Batch] - [Initial preparation]

Fig. 67: Batch - [Initial preparation]
1. [Call up the Main menu] :
2. [Select Configuration] :
3. Use the scrollbar to scroll to the [menu item Batch] .
4. [Select Batch] .
ð Screen switches to the selection level [Batch]
5. 'Select Initial preparation' .
ð The option field 'Initial preparation' is marked.
6. [ Click Next]
ð Screen change for the setting: 'Initial preparation' / 'Quantity' .
7. Enter the quantity in litres (before the decimal point) using the scrollbar.
8. 'Select quantity after the decimal point' .
9. Enter the quantity in litres (after the decimal point) using the scrollbar.
10. Press the button
ð Screen change for the setting: 'Initial preparation' / 'Capacity' .
11. Enter the capacity in percent (%) using the scrollbar.
12. Press the
ð The setting is saved, and the screen switches back to the batch overview.
13. Press the
14. By pressing the
15. By pressing the
417102276 Rev. 5-02.2020
4
3
7
Ä Chapter 7.7 'Main menu' on page 73
Ä Chapter 7.10 'Overview - Configuration' on page 92
to save the setting.
Next.
button.
button to return to the menu: [Configuration].
button, you can return to the [main menu].
button, you can return to the [operating display].
6
5
10
8
9
116
12
11