Hose Connection With Weld-On Joint - Ecolab EcoAdd Manuel D'utilisation

Mounting and installation

6.3.2.4 Hose connection with weld-on joint

1
2
3
4
5
Fig. 14: Pipe and hose connection with female coupling
1 Weld-on joint
2 Pipe or hose
3 Swivel nut
4 O-Ring
1. Weld the weld-on connection (1) to the hose connection.
2. Place an O-ring (pos. 4) in the groove of the suction or pressure valve (pos. 5).
3. Tighten the union nut (3) (detail B1).
417102276 Rev. 5-02.2020
A1
B1
54
5 Suction valve, pressure valve
A1 Pipe or Hose in the welded-on connection
B1 Valve connection: Target state after assembly