Ecolab EcoAdd Manuel D'utilisation page 354

Operational malfunctions / troubleshooting
10.2.2 Error code series 200
NOTICE!
When using a USB memory stick, it must be formatted using FAT 16 or FAT
32 as otherwise it will not be detected by the pump. The size of the memory
stick should not be too large as the data volume does not require too much
space and this could result in read errors.
Fault description
Error 200
Error 201
Error 202
Error 203
Error 204
Error 205
Error 206
Error 207
Error 208
Error 209
Error 210
Error 211
Error 212
Error 299
417102276 Rev. 5-02.2020
Cause
Error opening file on USB file system.
Error setting file pointer on USB file system.
Error reading file on USB file system.
Error writing file on USB file system.
Error switching directory on USB file system.
Error creating directory on USB file system.
Error querying file size on USB file system.
Error closing file on USB file system.
Error finding file on USB file system.
Error deleting file on USB file system.
Error in parameter USB import (file size).
Parameter USB import failed (pump key).
Parameter USB import failed (parameter version).
Error initialising USB file system.
152
Remedy
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.
Check USB stick.