Ecolab EcoAdd Manuel D'utilisation page 282

Control / Software
Step one: Select operating mode in the software:
1
Fig. 33: Select the operating mode
1. [Main menu] Press the
ð The 'Main menu' screen is displayed.
2. [Operating mode] - select.
ð Select 'Operating mode' is displayed.
3. 'Select Manual' :
4.
Pressing the
5. Pressing the
Step two: Activate dosing release
1
Fig. 34: Software setting: 'Dosing release'
1. [Main menu] Press the
ð The 'Main menu' screen is displayed.
2. [Configuration menu] - select.
ð Menu [Configuration menu] is displayed.
3. Use the scrollbar to go to the [Dosing release] using the scrollbar along the right
edge of the screen.
4. [Dosing release] - select.
ð The screen for setting the [Dosing release] is displayed.
5. [Dosing release] - select.
ð If the [Dosing release] is activated (closed contact),
a ü is displayed in the selection box.
6.
Pressing the
7.
Pressing the
8. Pressing the
417102276 Rev. 5-02.2020
button.
button saves and returns to the [Main menu].
button returns to the [Operating display].
2
button.
button saves and returns to the [Configuration menu].
button returns to the [Main menu].
button returns to the [Operating display].
80
2
4
3
4
3
6
5