Connector Assignment Of Slot Ii (5-Terminal) Input For Pulse Signal, Standard Signal, Metering Lock, Batch And Metering Monitoring - Ecolab EMP KKS E60 Manuel D'utilisation

7.2.3 Connector assignment of slot II (5-terminal) Input for pulse signal, standard signal,
metering lock, batch and metering monitoring
Fig. 12: Slot II (5-terminal)
Conductor
PIN color
1 brown
2 white
3 blue
4 black
5 grey
(plug assignments
1. Remove the protective cap.
2. Mount the connector plug according to the connector assignment.
CAUTION!
Only use a connector plug from our product range! (included in the delivery
scope).
Assignment
output 5 V, DC (loadable with max. 50 mA)
pulse input
metering lock
GND (┴)
Input standard signal 0/4...20 mA
Ä Chapter 14.5.2 'Connector II ' on page 125).
39
also as configurable batch / metering monitoring,
Ä Chapter 10.3.13 'Configuration / Metering monitoring'
Ä Chapter 10.3.15 'Configuration / Batch'
on page 82 &
on page 93
Device installation
417101442 Rev. 12-02.2019