Ecolab EcoAdd Manuel D'utilisation page 344

Operation
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused
by leaking fluids.
ENVIRONMENT!
Immediately soak up any leaking liquids with a suitable binding agent and
dispose of properly.
The following screens show example displays for a pump with capacity of
11 l/h. Specifications and information shown will differ for other pump sizes.
The container change is defined in the [Configuration] / [Empty signal], depending on the
Ä Chapter 7.10.8 'Empty signal' on page 103). The procedure differs depending
preset (
on whether 'Acknowledge automatically' or 'Acknowledge manually' was selected.
The container change is indicated by an orange flashing empty signal indicator
represents a reserve signal. This means that an empty signal should be anticipated in the
near future and that a container should be made available now. The empty signal
is displayed in red. The pump stops and the empty signal is lit continuously in red.
A container change is required after the empty signal.
417102276 Rev. 5-02.2020 142
that
itself