Using The Ir Remote Control; Touchscreen Operation - Sygonix 1594378 Mode D'emploi

b) Using the IR remote control
Press the " " button (25) to switch between the different displays:
A
A Four small camera images
B One large camera image
C One large and three small camera images
Use the " " or " " buttons (27) to select one of the four camera images ("B"). In display mode "C", you can use
these buttons to select which image to enlarge.
Use the " " button (30) to enable/disable automatic image switch mode.
c) Touchscreen operation
In real time/normal mode (the current camera image is displayed on the monitor/DVR), press the arrow symbol "
in the lower-left corner of the display to access the OSD menu.
A Exit the OSD menu
B Display one of the camera images in full-screen (touch the symbol to switch to the next camera)
C Automatically switch between the four camera images (one camera image is enlarged and the other three are
displayed as thumbnails on the right-hand side)
D Display all four camera images (in the same size)
E Enlarge one camera image; the other three images are displayed as thumbnails on the right-hand side (touch a
camera image to enlarge it)
F Access the main menu
G Start/stop video recording from the selected camera (to select a camera, touch the corresponding image on the
display, "V" will be displayed)
H Access the playback menu
I Adjust the volume (0 = speaker disabled, 5 = full volume)
66
B C
"