Activation" Function; Image Setting" Function - Sygonix 1594378 Mode D'emploi

• Touch the " " icon on the touchscreen, or press the "
camera selection menu. From here, you can connect another camera.
• To end the pairing process, touch the "
remote control. The monitor/DVR will restart and will be ready for use after a few seconds.
The monitor/DVR should now display all of the connected cameras.
If pairing was unsuccessful, check whether the wireless camera is connected to the power supply.
If the wireless camera is too far away, reduce the distance between the camera and the monitor/DVR, and
then restart the pairing process.
b) "Activation" function
Use this function to disable unavailable/unused wireless cameras or channels.
• After selecting this option on the monitor/DVR, use the touchscreen (or the "
remote control) to select one of the four cameras.
• Use the touchscreen (or the "
camera.
• Touch the " " icon on the touchscreen, or press the "
go back to the previous menu.
Press the "
display.
c) "Image Setting" function
Use this option to set the resolution and image quality for video recordings. The settings can be configured individually
for each wireless camera/channel.
Selecting a higher resolution/image quality increases the file size of the video recording.
• After selecting this option on the monitor/DVR, use the touchscreen (or the "
" " button (28) on the IR remote control) to select one of the four cameras.
• Use the touchscreen (or the "
and video compression/video quality settings.
• Use the touchscreen (or the arrow buttons ("
configure the corresponding setting. A check mark indicates the current setting.
• Touch the " " icon on the touchscreen, or press the "
go back to the previous menu.
Press the "
display.
" symbol on the touchscreen, or press the "
" and " " arrow buttons on the IR remote control) to enable/disable the selected
" button (31) on the IR remote control to cancel the setting and go back to the previous
" and " " arrow buttons on the IR remote control) to switch between the resolution
" button (31) on the IR remote control to cancel the setting and go back to the previous
" button (28) on the IR remote control to go back to the
" (28) on the IR remote control to save the settings and
" and " ") and the "
" (28) on the IR remote control to save the settings and
" button (31) on the IR
" and " " arrow buttons on the IR
" and " " arrow buttons and the
" button (28) on the IR remote control to
83