Power Saving Mode" Function; About" Function - Sygonix 1594378 Mode D'emploi

p) "Power Saving Mode" function
Use this option to configure the LCD sleep time. You can also set the LCD to turn on when movement is detected
within range of the camera.
Power saving mode only affects the LCD. Camera monitoring/recordings are not affected.
Two options are displayed when you select this function. Use the touchscreen (or the arrow buttons ("
and the " " button (28) on the IR remote control) to choose one of the following options:
• "Time Interval"
Use the touchscreen (or the arrow buttons ("
If you disable this function, the LCD will stay on.
To save the settings, touch the "
control.
• "Wake up on motion"
Use the touchscreen (or the arrow buttons ("
is automatically switched on when the camera detects movement.
To save the settings, touch the "
control.
Press the "
display.
q) "About" function
This option displays information about the software used in the firmware (GPL license).
Use the arrow symbols/buttons ("
Touch the "
control to go back to the previous display.
" symbol on the touchscreen, or press the "
" symbol on the touchscreen, or press the "
" button (31) on the IR remote control to cancel the setting and go back to the previous
" or " ") on the touchscreen or IR remote control to scroll up or down.
" symbol on the touchscreen, or press the "
" and " ") on the IR remote control) to select the LCD sleep time.
" and " ") on the IR remote control) to select whether the display
" button (28) on the IR remote
" button (28) on the IR remote
" (28) or " " button (31) on the IR remote
" and " ")
77