Deleting Recordings - Sygonix 1594378 Mode D'emploi

g) Deleting recordings
When the camera images are shown on the display (real-time/normal mode), touch the arrow symbol (" ") in the
lower-left corner of the monitor/DVR display to access the OSD menu, and then touch the playback symbol ("
section "H" in section 10c). Alternatively, press the "
If both an SD card and a USB storage device are connected to the monitor/DVR, the active storage device
is indicated by a symbol in the upper-right corner of the display ("SD Card" or "USB"). Touch the symbol to
switch between the storage devices.
Touch the "
the current selection and go back to the previous display.
Use the touchscreen (or the "
are organised by date. When using the remote control, press the "
You can then select the camera (C1....C4 ) whose recording you wish to delete (provided that a recording is available).
Finally, select the desired recording file. The files are organised chronologically, and the file size is displayed. The
menu also indicates new recordings that have not been played.
To delete the selected recording (marked in colour), touch the symbol or press the "
control.
You do not need to confirm the file that you wish to delete.
To delete an entire folder, you will need to delete all of the files in the folder before the folder can be deleted.
" on the touchscreen, or press the "
" and " " buttons on the IR remote control) to select the desired folder. The folders
" button (29) on the IR remote control.
" button (31) on the IR remote control to cancel
" (28) to confirm your selection.
" button (26) on the IR remote
", see
69