Volume" Function; Alarm Volume" Function - Sygonix 1594378 Mode D'emploi

n) "Volume" function
The wireless camera features a microphone (on the back of the camera, see position 18) in section 8b). Ambient
sound is transmitted to the monitor/DVR, which plays the sound through a built-in speaker.
Use the touchscreen (or the "
To save the settings, touch the "
control.
Press the "
display.
o) "Alarm Volume" function
Use this option to adjust the alarm volume. The alarm goes off when movement is detected within range of the camera
(provided that the alarm is enabled).
This setting does not affect the volume setting described in section 12. n).
When the mute function is enabled (see section 12. k), the alarm will also be muted.
Use the touchscreen (or the "
volume. The alarm tone will be played through the monitor/DVR speaker so that you can test the volume.
To save the settings, touch the "
control.
Press the "
display.
76
", " ", " " and "
" symbol on the touchscreen, or press the "
" button (31) on the IR remote control to cancel the setting and go back to the previous
", " ", " " and "
" symbol on the touchscreen, or press the "
" button (31) on the IR remote control to cancel the setting and go back to the previous
" buttons on the IR remote control) to select the desired volume.
" buttons on the IR remote control) to select the desired alarm
" button (28) on the IR remote
" button (28) on the IR remote