16. "Alarm" submenu
See section 11 for instructions on how to access the main menu and the corresponding submenu.
The following functions are available:
"Motion Detection"
"PIR detection"
a) "Motion Detection" function
When the alarm is enabled, the monitor/DVR sets off an alarm when it detects a change in the image content.
The alarm volume can be adjusted (see section 12. o).
• To access this option, use the touchscreen or the arrow buttons ("
remote control.
• Use the touchscreen or the arrow buttons ("
able/disable the alarm.
• Touch the "
" icon on the touchscreen, or press the "
go back to the previous menu.
Press the "
display.
b) "PIR detection" function
This function (if displayed) is not supported by this product version, as the wireless camera does not feature a PIR
sensor.
Enable/disable motion detection (an alarm tone will be played when the image content
changes).
This feature is not supported, as the wireless camera does not have a PIR sensor; this
feature is designed for another product version.
" button (31) on the IR remote control to cancel the setting and go back to the previous
" or "
" or "
") and the "
" button (28) on the IR remote control to en-
" (28) on the IR remote control to save the settings and
") and the "
" button (28) on the IR
85