Playback" Menu; Playing Video Recordings - Sygonix 1594378 Mode D'emploi

14. "Playback" menu

a) Playing video recordings
See section 11 for instructions on how to access the main menu and the corresponding submenu.
• When you select this submenu, the LCD will display the video recording folders in chronological order.
If both an SD card and a USB storage device are connected to the monitor/DVR, the active storage device
is indicated by a symbol in the upper-right corner of the display ("SD Card" or "USB"). Touch the symbol to
switch between the storage devices.
Touch the "
cancel the current selection and go back to the previous display.
• Use the touchscreen (or the "
are organised by date. When using the remote control, press the "
• You can then select the camera (C1....C4 = camera #1....#4) whose recording you wish to view (provided that a
recording is available).
• Finally, select the desired recording file. The files are organised chronologically, and the file size is displayed. The
menu also indicates new recordings that have not been played.
• Touch the selected recording again to start playback (alternatively, press the "
Touchscreen controls:
Touch the arrow symbol (" ") in the lower-left cor-
ner of the display to display the touchscreen controls
(see right-hand image):
A Hide touchscreen controls
B Stop playback; return to the recording selection
menu
C Start playback (or pause a recording)
D Rewind
E Fast forward
F Change image mode (fullscreen/large camera
image + 3 small camera images)
IR remote control buttons:
• Rewind/fast forward:
• Pause/resume:
• Increase/decrease volume:
• Stop playback:
• Change the image mode:
80
" symbol on the touchscreen, or press the "
" and " " buttons on the IR remote control) to select the desired folder. The folders
" " and " " buttons
" " button (28)
" " or " "
" " (29) or "
" " button (25)
" (28) to confirm your selection.
" (31) button
" button (31) on the IR remote control to
" button (28) as described above).