2 Avoiding material dam-
age
ATTENTION!
Improper use may cause material
damage.
Do not operate the appliance at
▶
no-load.
Never use genuine parts and ac-
▶
cessories for other appliances.
Only use the appliance with ap-
▶
proved genuine parts.
Observe the maximum processing
▶
quantities.
Do not store objects or deposit
▶
tools in the pot.
Never heat the appliance when
▶
empty.
The pot should only be used in
▶
conjunction with the main unit.
Never use force to press the lid
▶
down.
During operation warm exhaust air
escapes from the vent grille at the
rear. If this is blocked, it may cause
the appliance to overheat.
Set up the appliance at a sufficient
▶
distance from walls, easily dam-
aged surfaces and other appli-
ances.
Vibrations may impair functioning of
the appliance.
Do not place the appliance on
▶
moving or vibrating surfaces.
Using the wrong lid may damage
parts of the appliance.
Only use the inner lid with feeding
▶
tube in combination with the re-
versible slicing disc and the re-
versible grating disc.
→ "Inserting the shredder attach-
ment with shredding discs",
Page 102
Avoiding material damage en
Objects in the pot or feeding tube
can cause damage.
Do not insert any objects in the pot
▶
or the feeding tube, e.g. wooden
spoons.
Heat can damage the shredding
discs.
Before use leave the main unit to
▶
cool down.
Do not use in combination with
▶
heating functions.
Adding too much food may damage
the appliance.
Do not chop more than 1 kg of in-
▶
gredients at a time.
High temperatures may damage ob-
jects in the pot.
Do not store objects or tools in the
▶
pot.
Persistent intense heat may cause
the spatula to melt.
Only leave the spatula in a hot pot
▶
while in use.
Incorrect cleaning may damage the
appliance.
Never clean the contact point with
▶
the rough side of the sponge.
Never wedge plastic parts in the
▶
dishwasher as they could become
deformed.
3 Environmental protec-
tion and saving energy
3.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
87