Connecting Appliance To The Wlan Home Network (Wi-Fi); Home Connect Settings; Remote Diagnostics; Data Protection - Bosch MCC9555FWC Manuel D'utilisation

17.1 Connecting appliance to
the WLAN home network
(Wi-Fi)
Refer to the Home Connect docu-
▶
ments supplied for more informa-
tion.
Overview of the Home Connect settings
Here you can find an overview of the Home Connect settings and network set-
tings.
Basic setting
User settings
Disconnect from
network
Connect to net-
work
Connect to app
17.3 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip: For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
Selection
Home Connect on
Home Connect off
-
Manual connec-
tion
Automatic connec-
tion
-
17.2 Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
Home Connect has been set up and
whether the appliance is connected
to your home network.
Description
Switch off the wireless module with
prolonged absence or to save energy.
Note: In networked standby mode
your appliance requires max. 2 W.
Note: You cannot operate your appli-
ance via the Home Connect app
without a network connection.
Reconnect the appliance to your
home network.
Connect the appliance to the
Home Connect app or additional
Home Connect accounts.
visit the service/support section of
your local website: www.home-con-
nect.com
17.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
Home Connect en
115