Basic Settings; Changing The Basic Set- Tings; Overview Of The Basic Settings - Bosch MCC9555FWC Manuel D'utilisation

Activating button lock
Simultaneously press
▶
3 seconds.
a The keylock has now been activ-
ated.
a The display shows
Tips
¡ You can pause the current process
despite the keylock by pressing
¡ If you are cleaning the main unit,
you can use the keylock for wipe
protection.
Deactivating button lock
Simultaneously press
▶
3 seconds.
a The button lock has now been de-
activated.
19.2 Overview of the basic settings
You can find an overview of the basic settings here.
Setting
Home Connect
Standby after
Display brightness
1
Factory setting
and for
⁠ .
⁠ .
and for
Selection
Selection depends on
the network status and
whether the appliance is
connected to HomeCon-
nect.
The display shows net-
work information:
¡ IP
¡ SSID
¡ MAC address
¡ Serial number
5 mins - 1 hr
1
15 mins
10% - 100%
1
50%
19 Basic settings
You can configure the appliance to
meet your needs.
19.1 Changing the basic set-
tings
You can configure the appliance to
meet your needs.
Press in the main menu.
1.
a The display shows the list of basic
settings.
Select the settings you require.
2.
a The settings will be automatically
saved.
To exit the basic settings, press ⁠ .
3.
Description
Set up Home Connect.
→ "Home Connect ",
Page 114
Select settings for Home
Connect.
→ "Overview of the
Home Connect settings",
Page 115
Set the duration after
which the appliance
automatically switches to
standby mode if there is
no action on the display
or if the appliance is run-
ning.
Set the display bright-
ness in 10% steps.
Basic settings en
117