Troubleshooting - Bosch MCC9555FWC Manuel D'utilisation

en Troubleshooting
21 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
working.
Appliance cannot be
switched on or star-
ted.
After reconnection to
the power supply the
appliance will start
with a delay.
Touch display does
not respond to inputs.
Turbo button is not
displayed.
124
Cause and troubleshooting
Appliance has no power supply.
Check whether your appliance is supplied with
▶
power.
button does not respond.
Disconnect the appliance from the power supply for
▶
approx. 5 seconds and then reconnect it again.
Loading the systems for the first time takes longer
than when starting the appliance from standby.
Wait until the process has finished.
▶
Tip: Leave the appliance connected to the power sup-
ply.
Touch display is too wet.
Dry the touch display with a soft cloth.
▶
Touch display is soiled.
Clean the touch display.
▶
Tip: You can use the keylock for wipe protection.
→ "Activating button lock", Page 117
Keylock is activated.
Deactivate the keylock.
▶
→ "Deactivating button lock", Page 117
Universal knife is not selected.
Select the universal knife.
▶
→ "Setting manual cooking", Page 111