Bosch MCC9555FWC Manuel D'utilisation page 125

Masquer les pouces Voir aussi pour MCC9555FWC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Fault
Drive and heating ele-
ment are not working.
"Demo mode" ap-
pears on the display.
Operation switches
off.
Scales are not meas-
uring correctly.
Lid cannot be opened. Lid lock mechanism is active.
Lid cannot be opened
or closed.
Appliance makes a
loud clicking sound.
The display shows .
Cause and troubleshooting
"Demo mode" is activated.
Disconnect the appliance from the power supply
1.
and switch the appliance back on.
Deactivate "Demo mode" within 5 minutes.
2.
→ "Changing the basic settings", Page 117
Ingredients are distributed unevenly.
Distribute the ingredients evenly in the pot.
Processing quantity is too high.
Reduce the processing quantity.
Incorrect tool is inserted.
Insert the right tool.
Appliance is exposed to excessive vibrations.
Set up the appliance on a stable, level, clean and
flat work surface.
→ "Setting up the appliance", Page 91
Base is uneven.
Set up the appliance on a stable, level, clean and
flat work surface.
→ "Setting up the appliance", Page 91
Rubber suction feet are soiled.
Wipe the rubber suction feet with a damp cloth.
Power cord pulled too tight.
Make sure that the power cord is not pulled too
tight.
→ "Connecting the appliance to the electricity sup-
ply", Page 92
End the current operation and wait 3 seconds.
Disconnect the appliance from the power supply for
1.
30 seconds.
Switch the appliance back on.
2.
Take the pot vertically out of the main unit.
Cover for the outer lid is not at the unlocking position.
Move the cover for the outer lid to the unlocking po-
sition.
→ "Opening and closing the lid", Page 104
Lid lock is being activated or deactivated.
The clicking sound is normal and can be disreg-
arded.
→ "Lid lock", Page 116
Troubleshooting en
125

Publicité

Chapitres

Table des Matières
loading

Table des Matières