Cleaning And Servicing; Cleaning Products; Overview Of Cleaning - Bosch MCC9555FWC Manuel D'utilisation

Masquer les pouces Voir aussi pour MCC9555FWC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en Cleaning and servicing
Setting
Volume
Key tones
Boiling point automatism 0 m - 50 m
Factory settings
1
Factory setting
20 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
20.1 Cleaning products
Only use suitable cleaning products.
ATTENTION!
Using unsuitable cleaning products
can damage the appliance.
Do not use harsh or abrasive

cleaning products.

118
Selection
off
1
1: quiet
2: medium
3: loud
1
on
off
1
51 m - 300 m
301 m - 600 m
601 m - 900 m
901 m - 1200 m
1201 m - 1500 m
1501 m - 1800 m
> 1800 m
-
20.2 Overview of cleaning
See here for an overview of how to
best clean the components of your
appliance and the tools.
Description
Set the volume of the
tones.
Set the key tones.
Set your altitude above
sea level to adjust the
boiling point.
Reset edited settings
back to the factory set-
tings.
Do not use cleaning products with
a high alcohol content.
Do not use corrosive or aggressive
cleaning products or ones contain-
ing chlorine or calcium carbonate.
Do not use oven cleaner.
Do not use limescale remover on
the touch display or control panel
as they may leave permanent
staining.
Wash sponge cloths thoroughly
before use.

Publicité

Chapitres

Table des Matières
loading

Table des Matières