en Timer
To switch off the scales, press
5.
start processing.
Tip: Also use the scales together
with the accessory. Weigh the in-
gredients directly when adding them,
e.g. to the blender attachment or the
ice maker.
Note: The scales switch off automat-
ically after approx. 3 minutes of in-
activity.
8.3 Changing the display
units of the scales
Requirements
¡ The rotary switch is set to
¡ The scales are switched on.
Press and hold
1.
The display unit for the scales
changes.
Symbol
Release both buttons.
2.
a The scales will calibrate them-
selves and restart with the
changed setting.
a The setting is saved.
Timer
9 Timer
You can read off the processing time
Timer
that has elapsed or reset it.
9.1 Display values of timer
Observe the following values when
using the timer.
Display range
44
.
and .
Unit
Display in
grammes
Display in
pounds
0 seconds to
59 minutes and
59 seconds
or
Display steps
9.2 Reading off and resetting
the processing time
Set the rotary switch to the re-
1.
quired speed.
a The display shows the processing
time.
To reset the display to "00:00"
2.
press
Notes
¡ If you interrupt processing for less
than 30 seconds, the last values
displayed are saved and will re-
sume if processing starts again.
¡ If you interrupt processing for
more than 30 seconds, the appli-
ance will switch on the scales and
perform calibration.
Cleaning and servicing
10 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
10.1 Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
Do not use cleaning agents con-
▶
taining alcohol or spirits.
Do not use sharp, pointed or metal
▶
objects.
Do not use abrasive cloths or
▶
cleaning agents.
1 second
.