Safety Instructions For This Appliance - Bosch MUM54Q Serie Notice D'utilisation

Masquer les pouces Voir aussi pour MUM54Q Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 76
en
Always disconnect the appliance from the supply if it is left unattended and
before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.

, Safety instructions for this appliance

Risk of injury
Risk of electric shock!
Do not insert mains plug until all preparations for working with the appliance
are complete.
Never immerse the base unit in liquid or hold under running water.
Do not use a steam cleaner.
Do not adjust the swivel arm while the appliance is switched on. Wait until
the drive has come to a standstill.
Do not change tool/accessory until the drive is at a standstill – when the
appliance is switched off, the drive continues running briefly.
Use only the rotary switch to switch the appliance on or off.
When the appliance is not in use, pull out the mains plug.
Before eliminating a fault, pull out the mains plug.
Risk of injury from the rotating tools!
Keep hands clear of rotating parts. While the appliance is operating, never
place fingers in the mixing bowl. Attach the cover (12) before operating the
appliance!
Do not change tools until the drive has come to a standstill – when the
appliance is switched off, the drive continues running briefly and stops in
the tool change position. Do not move the swivel arm until the tool has
come to a standstill.
For reasons of safety the appliance cannot be operated unless unused
drives are covered with drive guards (5, 8).
Before attaching/removing the continuous-feed shredder, wait until the
drive has come to a standstill and pull out the mains plug. Do not reach into
the feed tube.
Risk of injury from sharp blades!
Do not grip the sharp blades or edges of the cutting discs.
Take hold of cutting discs by the edge only.
Do not touch blender blades with bare hands.
Risk of injury from sharp blades/rotating drive!
Never place fingers in the attached blender! Do not remove/attach
the blender until the drive is at a standstill! Operate the assembled
blender only and with the lid attached.
Robert Bosch Hausgeräte GmbH
65

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mum56z serie

Table des Matières