C.4 Calibrated Sensors - AOIP CALYS 150 Mode D'emploi

CALYS 150

C.4 Calibrated sensors

The unit's calibrated sensors function makes it possible to use sensors of which the calibration (correction) factors can be
taken into account by the unit at the time of measurement.
Open the MEASUREMENT MENU dialog box,
Select the Calibrated Sensors function.
Press ENTER.
Use the Up / Down
Press ENTER.
Fill in the information fields for the sensor. To move from field to field, use the function button, F1 (
168 / 194 NTA47224-300A9
arrow buttons to adjust the parameters or select a new line to define a new sensor.
ADVANCED OPERATION
).