Advanced Operation; Imulation Odes; Manual Edit Mode - AOIP CALYS 150 Mode D'emploi

C. ADVANCED OPERATION
C.1 Simulation Modes
Several transmission modes are available in the CALYS 150 to facilitate rapid checking and calibration of instruments and
transmitters.
To change the transmission mode, open the transmission window using the OUT function key (F2).
When the transmission window is open, the CALYS 150 is set by default to the Manual edit mode.
To access the other modes, select the Mode menu using function key F4. Select a transmission mode using the Up/Down
keys of the navigator and confirm with ENTER.
To exit a transmission mode and return to the default mode, press the ESC key.

Manual Edit Mode

In this mode, the value to be transmitted may be entered directly using the alphanumeric keys.
The value entered appears at the bottom of the transmission window during entry.
To cancel the entry, press the ESC key. To transmit the value entered, confirm with the ENTER key.
Simulation Modes
Setting entered
manually
NTA47224-300A9
C
157 / 194