AOIP CALYS 150 Mode D'emploi page 177

C
Storing the current acquisitions
STOP:
Stops the current storage operation.
PARAMETERS
This can be used to define:
the burst size (10,000 values max.),
the sampling period, from 0.5 sec. to 30 min,
and the type of trigger (none, low level, high level).
the same parameters may be selected for both channels (V1 and V2),
the same commands common to both channels (V1 and V2) may be selected
Block size (2,500 measurements)
Post trigger = 1000 measurement
Trigger on programmed value = 3 V
Burst display:
The burst can be displayed as a table of values or a trend curve.
At this level, markers can be set (F1 and F2 function keys) and all values falling between these 2 markers can be displayed
in graphical form.
NTA47224-300A9 177 / 194