AOIP CALYS 150 Mode D'emploi page 141

B
Measurement on channel V1
Once the procedure defined, it may be "Run" with the F4 key, "Duplicated" with the F2 key or "Edited" with the F3 key. "B"
in the HART column indicates that it is a verify loop procedure.
When running, you may enter the device serial number, name of the operator and a comment. This information will be shown
in the verification report (PV).
Select "Adjustment step": "Before adjustment", "After adjustment" or "Not specified".
NTA47224-300A9 141 / 194