About This Guide; Unpacking; Returning - AOIP CALYS 150 Mode D'emploi

About this guide

This user guide consists of four parts: A, B, C and D.
Part A contains general information and a description of the hardware and software of the unit. It also contains a paragraph
on safety and user precautions.
Part B contains brief handling information and a description of the various modes of operation.
Part C contains a description of the advanced functions.
Part D contains the technical specifications of the CALYS 150.

Unpacking

All CALYS 150 units are mechanically and electrically checked before delivery. The necessary precautions have been taken
to ensure that they reach the user undamaged.
However, it is a good idea to make a brief check for any damage that may have occurred during transportation. If this is the
case, make an immediate claim against the carrier.
The following accessories are standard:
A mains unit for charging the battery pack
6 measurement cables
Mounting strap
Factory test report

Returning

If the unit is to be returned, it is preferable to use the original packaging and state as clearly as possible, in a note attached
to the unit, the reasons for its return.
Warning
The packaging supplied with the calibrator can withstand a maximum pressure of 20 bar at 21°C (290 psi at 70°F).
Subjecting the package to a higher pressure may damage the unit.
AOIP SAS
Zone ACTICENTRE
Bâtiment H – Accès H1
156/220 rue des Famards
CRT 2
F-59273 Fretin
From France:
01 69 02 89 30
From your country:
+33 (0)1 69 02 89 50
Fax : +33 (0)1 69 02 04 38
Email : sav@aoip.com
A
Introduction
NTA47224-300A9 105 / 194