B.3 Generation / Simulation Or Measurement On Channel V2; Generation / Simulation Mode - AOIP CALYS 150 Mode D'emploi

CALYS 150

B.3 Generation / Simulation or Measurement on Channel V2

Channel V2 may be used as a Generation/Simulation or Measurement Channel. This channel is accessed with the F2
function key (V2). Pressing this button activates the transmission/simulation window: the lower window in the display is then
marked by a rectangular border.
Key F2 is used to switch
from channel V1 to channel
V2.

Generation / Simulation Mode

Generation/Simulation mode from channel V2 is accessed via the F1 function key (Menu). When in measurement mode:
Select V2 Configuration (near the bottom of the drop-down list) and Transmit with the function and navigation keys.
Confirm with ENTER.
To select a simulation function, press the F1 key (Menu).
In Transmit mode, connections are across the four "IN/OUT" terminals located on the right half of the unit:
148 / 194 NTA47224-300A9
GETTING STARTED