AOIP CALYS 150 Mode D'emploi page 150

CALYS 150
GETTING STARTED
If the loop power supply is off, the CALYS 150 simulates a passive transmitter supplied with 24 V externally.
When the square law scale is selected, it must be activated by using the Menu Set to scale menus. Once "set to scale"
is activated, the user enters the values to be simulated in a unit of the new scale.
The CALYS 150 indicates the configuration selected in the window, using the following icons:
: to show Loop power is off
: to show Loop power is on
: to indicate a square law scale
Refer to paragraph B.2.2 (Measuring current) for an explanation of the square law scale.
150 / 194 NTA47224-300A9