AOIP CALYS 150 Mode D'emploi page 137

B
Measurement on channel V1
For this temperature sensor, you may change units "°C" or "°F", set display values for 0% and 100%, set a smoothing time
(in s) or select a transfer function (linear or square root).
Press "Transmit" (F2 key) to send the new parameters to the device for them to be taken into account.
The detector configuration option is not supported by every sensor.
Press "Transmit" (F2 key) to send the new parameters to the device for them to be taken into account.
NTA47224-300A9 137 / 194