Measurement Mode - AOIP CALYS 150 Mode D'emploi

CALYS 150
During pulse generation, a progress bar indicates the state of progress. The function keys can be used to control generation:
The key stops generation at any time
The key suspends generation
The key commences or resumes generation
The icon in the transmission window indicates suspended generation.

Measurement Mode

Measurement mode from channel V2 is accessed with F1 function key (Menu) and V2 Configuration item (near the bottom
of the drop-down list).
If in Transmit mode, select Measurement with the function and navigation keys.
Confirm with ENTER.
To select a Measurement function, press the F1 key (Menu).
Select Function ... menu with navigation keys and confirm with ENTER key. As channel V2 Measurement mode
is the same as channel V1 Measurement mode, refer to chapter B.2.
In Transmit mode (V2), connections are across the four "IN/OUT" terminals located on the right half of the unit.
156 / 194 NTA47224-300A9
GETTING STARTED