General; A.1 Introduction - AOIP CALYS 150 Mode D'emploi

CALYS 150
A. GENERAL
We are very grateful to you for choosing this
experience of over one hundred years in the manufacture of high quality, accuracy measuring instruments.
Because of this, we are able to continue our policy of continuous innovation which has served our customers so well over
AOIP S.A.S
the last 100 years.
us to perfect our know-how and improve our future products.

A.1 Introduction

The CALYS 150 is hand-held, highly accurate multifunction calibrator used to measure and transmit simultaneously over 2
insulated channels or to measure over 2 input channels (differential measurements or comparative measurements). It is
specially designed for calibration and maintenance and can measure and simulate physical and electrical quantities, either
on site or in the laboratory.
It can perform all the following functions:
Measure voltages, direct currents, resistance and pressure over 2 insulated channels.
Measure temperatures by thermocouples, resistive probes, thermistors over 2 insulated channels.
Supply power and measure a current loop which is compatible with the HART® protocol.
Measure frequencies and counts (over one channel)
Generate DC voltages and currents.
Simulate resistance, thermocouples, resistive probes and thermistors.
Recording of measurements and their display as a table or trend curve.
Calibration and generation of the calibration report.
Possibility of using calibrated sensors with memorization of the calibration factors
Measurement and transmission or measurements over 2 channels can be carried out simultaneously with double display.
The CALYS 150 has many associated functions that extend its range of application:
Relative measurement.
Results displayed based on a linear or other conversion law.
Generation of increments and simple or cyclic ramps.
Synthesis of curves.
Compatibility with 21CFR Part 11 standard for electronic records
A number of improvements have provided it with:
Rapid access to all its functions.
Intuitive user interface.
Bluetooth® Interface
Advanced on-line help system.
Multi-functions keys defined step-by-step on the display.
Connections which can be made with 4 mm safety plugs.
Protection against overloads.
Powered by a rechargeable battery with rapid internal charger.
The unit is enclosed in an ABS case with rubber sheath.
104 / 194 NTA47224-300A9
AOIP S.A.S
encourages your comments and would willingly accept any suggestions from you to help
accuracy measuring instrument which benefits from our

GENERAL